We established a basic game plan to follow when evaluating how to approach a scene. This "Hierarchy of Microphone Techniques", you will recall, consists of the following:
- Overhead boom
- Boom from underneath
- Boom mics as plant mics
- Lavalier mics as plant mics
- Lavalier mics as body mics
- Lavalier mics, wireless
As stated before, overhead miking from a fishpole (or studio boom) is the most favored technique for film/video production and is the best choice most of the time.
The operational word here is "overhead". Why?
There is a tendency for filmmakers to rely too heavily on their camera mounted shotgun mics rather than separately mounted boom mics. Obviously, having a microphone on the camera is more convenient. But our objective in the field is not convenience, but obtaining the highest quality sound possible!
Think of your shotgun microphone as a telephoto camera lens. A long lens will isolate and magnify a distant subject, but at the same time it will compress the perceived distance between subject and background. Everything appears to be closer together than they physically are.
The same sort of spatial compression takes place with microphones. The voice of the
subject will sound closer, but any noise in the background will also be magnified.
Therefore, the key to isolating voice without background noise is to create a line of
sight with the microphone that sees the voice but does not see the background!
To put this in cowboy talk, aim the mic from ABOVE the subject so that the mic points
DOWNWARD. The line of sight reaches from the front of the mic, to the mouth, and then
towards the ground. Background noise and ambiance will strike the sides of the microphone
(which is the maximum rejection angle) rather than striking the mic along its most
sensitive front axis.
In the event that it is impossible to mike from above, the next best option is to mike
from below, so that the line of sight terminates with sky. Personally, I find that miking
up tends to emphasize bass a bit more, since the mic is seeing more of the chest cavity.
Also, camera operators are not as accustomed to maintaining a strict lower frame line as
they are at watching their headroom, so the mic tends to pop into the shot more
Another important consideration when booming is not just the angle of the mic but the
distance. Shotgun mics are not designed to be used (for broadcast quality sound) at much
more than a few feet. One of the great advantages of using the mic on a fishpole, as
opposed to being attached atop a camera, is that the mic can be brought close to the
subject even when the camera isn’t.
I often tell novice boom operators that they aren’t doing their job properly if
the camera operator fails to complain that the mic is in the frame (during rehearsal).
Every inch closer that the mic can be to the subject will improve the quality of the
sound. Never fly the mic higher than it absolutely needs to be if you want to control echo
and background noise. Several inches to a foot over the top of talent’s head is
ideal; up to a few feet overhead is okay depending on the situation.
Some camera operators confuse width with height. A wide-angle lens means wide from left
to right; it doesn’t mean that they have to reveal several feet of air above the
talent’s head. A simple tilt-down of the lens will correct excessive headroom in the
composition when using a wide angle lens!
Learn to recognize and take advantage of the on-axis (live) and off-axis (deader)
angles of your mics. Most shotgun mics are very much on-axis at the front (say, twelve
o’clock), and taper off towards the back (six o’clock). But at exactly six
o’clock, there is an increase of sensitivity! In other words, the back of the mic
does not offer the most rejection to background noise. The most rejection occurs around
four o’clock and eight o’clock respectively.
So to decrease a source of noise, you would not want the mic facing directly away from
it, as that would only serve to put the noise at the live spot in the back. Instead, angle
the mic so that the noise source strikes slightly to the side and rear.
When deploying your mic overhead, keep these angles in mind. Often it is better to
compromise the angle of the voice (slightly) in order to keep heavy background noise to a
minimum. Any angle of the mic should be consistent with the source of the worst noise. For
instance, a person talking on the sidewalk would put the mic overhead, but cheated towards
the buildings and away from traffic — even if the camera changes shot angles.
Similarly, a subject walking along the edge of the surf on a beach should have the mic
facing inland, not out towards the noisy surf.
Another important factor to pay attention to is "perspective". The distance
between microphone and subject should agree with the distance to the screen or camera. In
a long shot, it is natural for the voice to sound more distant and for there to be a
greater presence of ambiance. Close-up angles should consist of more voice and less
However, angle of motion is very important. A person walking away from the camera
should not be walking towards the microphone, or vice versa! Novice boom operators are
notorious for perching themselves in a safe spot out of the frame that places the mic in a
position not consistent with the direction of travel relative to the lens.
A person with their back to camera should not be facing the mic. A person walking up to
the camera should not be walking away from the mic.
To balance a strong voice against a weak voice, use your mic angle and placement rather
than riding gain (volume) on your mixer/recorder. Let the strong voice strike the mic
slightly off-axis and/or from a little more distance than the softer speaking actor. This
will balance the relative volume of both people without having the background noise
continually changing during the shot.
Let’s examine the types of microphones we have to chose from.
Microphones can be defined by two sets of parameters: sensitivity and pattern.
In terms of sensitivity, there are three main categories that a microphone can fall
Dynamic: Think of a dynamic microphone as a manual typewriter. The harder that your
finger hits the key, the stronger the imprint. With a dynamic mic, the pressure of the
sound waves moving the diaphragm actually generates electrical current (which is what the
sound signal is). Dynamic mics are extremely rugged and do not require any form of battery
powering. They are relatively insensitive to background noise (or feedback) and are
commonly used as handheld performance mics and reporter’s mics.
A dynamic mic used close to the mouth will reject all but the loudest background noise,
making them ideal for stand-up reporting (where the mic can be seen on camera) or
narration recording (to eliminate as much background as possible).
Dynamic mics tend to naturally compress loud noises, making them a good choice for
recording explosive and crashing sound effects. A loud sound effect, unless carefully
recorded, will tend to be "blown" right off of the recording tape, which is why
real gunshots that leave your ears ringing only sound like dull pops on a videotape.
The downside to dynamic microphones is that they have very poor reach in terms of
distance when it comes to dialogue. They are pretty much useless on a boom or fishpole.
Here’s a tip: When filming an actor who is pretending to be a performer and will
be seen using a handheld mic, it is much safer to consider the hand mic as merely a stage
prop and to mic the actor with a boom or lavalier. Actors in those situations tend to
gesture wildly with the mic, making your chances of getting good dialogue quite slim.
The next most sensitive group of microphones are the electret condensers.
Electret condenser microphones are like electric typewriters. These microphones operate
off of a nominal voltage (usually 1.5 volts) which is derived from an internal battery
such as an AA or button battery. The voltage that creates the audio signal comes from the
battery (as opposed to being generated magnetically as in the case of dynamics); the
relative sound levels control the capacitance, releasing voltage according to what the mic
hears. Almost think of it like a meter that measures the sound, and releases a signal
Electret condenser mics offer much more sensitivity (range) than dynamics, and include
what is commonly referred to as "ENG" grade shotgun mics as well as most
Examples of electret condenser shotgun mics include the Sennheiser ME80 & K66; and
the Audio Technica AT835b, 815b. Lavaliers include the Sony ECM44/55/66/77, the Tram, the
Sennheiser MKE2, and the Audio Technica 830.
The third group of professional microphones are the true condenser type. Think
of electronic word processors. Condenser shotgun mics are the most sensitive and offer the
greatest working range for Production. Condenser mics require external powering such as
12volt T or 48volt Phantom, which can be supplied by an accessory battery power supply
plugged in line between the microphone and the mixer/recorder. Some mixers and VTR’s
offer built-in mic powering.
Examples of condenser shotguns include the Sennheiser MKH416/816, the Schoeps CMC/MK41,
and the Audio Technica 4073/4071.
A note here on microphone powering, which is an area very confusing to many people. As
stated before, dynamic mics do not require any external powering, and plug directly into
the MIC INPUT of a mixer/recorder. Electret condenser mics are self-powered (by an
internal battery) and also plug directly into the MIC INPUT. Condenser mics require
external powering, which can be a battery supply located anywhere along the mic cable
path. For instance, the mic connects to a regular XLR cable, that cable plugs into the
power supply, and then another short cable connects the power supply to the MIC INPUT.
In all of the above cases, if the mixer/recorder offers the option of mic powering,
that option IS NOT USED. The correct MIC INPUT setting would read "dynamic".
Sometimes, we can power a CONDENSER mic directly from the mixer or recorder. In that
case, the external battery supply is not used at all, and the mic plugs directly in. A
switch near the MIC INPUT should be switched to "48 Phantom" or "T" or
Condenser mics come in two basic varieties: 12 volt T or 48 volt Phantom. The
designations "12 volt T" and "12 volt A-B" mean the exact same thing,
by the way. The difference between T powering and Phantom is significant.
T powering involves sending 12 volts up the mic line along pins 2 and 3 of the mic
cable. Traditionally, pin 2 is PLUS and pin 3 is MINUS. Pin 1 is simply used for shield
Phantom Power uses all three pins to send 9 to 48 volts of powering up to the mic. Both
pins 2 and 3 are PLUS, and pin 1 is MINUS. Some mics are advertised as being able to
function at 9 or 12 volts Phantom. However, all of the premium condenser mics that I have
encountered prefer and are rated for 48 volt Phantom.
In theory, Phantom power should not interfere with the operation of dynamic mics, since
the voltage is balanced equally across pins 2 and 3 (which conduct the audio signal).
Experience dictates otherwise. Although most dynamic handhelds are not affected, the same
is not true of electronic based mics, such as electret condensers and wireless.
There is one more complication to be aware of, namely the term "red dot". In
the early days of filmmaking ("b.bc." or before Beta Cam), people only used
Nagra recorders for audio. Because Nagras are positive ground, they were set up with
T-powering that was pin 3 PLUS and pin 2 MINUS. To correct for this, most mics intended
for film use were modified to match this reversed standard, and were designated as
"red dot" mics because a red dot was usually (but not always) engraved on the
side. Today, one will encounter quite a number of Sennheiser 415/416/815/816 shotgun mics
that are "red dot" polarity. To make them work with non red-dot power supplies,
simply use a reversing cable between the mic and the power supply. A reversing cable is
merely a short mic cable that has the leads switched in one connector, so that pin 2 goes
to 3, 3 goes to 2, and 1 remains connected to 1.
The other parameter by which we classify shotgun mics is by the pickup pattern.
Omnidirectional refers to hearing equally well in all directions. Most lavaliers are
omni, which is good since they could end up being worn in different places and at
different angles in order to accommodate clothing styles. Omni mics are also preferred for
handheld interviews, since this allows for the unexpected overlapping of dialogue between
interviewer and subject.
Cardioid pattern literally means heart shaped, and refers to microphones that are more
directional from the front.
Hypercardioid or supercardioid are considerably directional. This group includes what
are known as "short shotguns" such as the 416 and 4073.
Ultra-directional means extremely directional, such as full or long shotgun mics.
Examples include the Senn. 816 and the Audio Technica 4071.
So which mic do you use?
The rule of thumb is that the more directional the microphone, the more it will
emphasize echo in a small room. Therefore, reach the best compromise between the reach you
need and the mellowness you would like to hear.
Long shotguns work the best for most exterior shots, since theses mics are
characterized by long reach and very narrow pick-up. The narrow field of view helps to
control background noise if the mic is deployed overhead. The greater range helps because
exterior shots are very often much wider than interior frames, since there is more
interesting stuff to look at or action to cover.
Always used a blimp windscreen on your long shotguns to guard against wind noise. I
find that using a foam windscreen inside of the blimp gives almost twice the protection.
On the very sensitive condenser mics, a furry windsock will help to disperse the wind and
diffuse it upon impact.
To guard against rain, use lots of ScotchGuard spray. Extreme rain (or fire fighting)
would call for a thin condom over the mic itself, as well as a rainhat over the blimp made
from what we call "hogs hair" or "rubberized hair". Hogs hair is a
thicket type material that will break up the raindrops and prevent the pitter patter sound
of them striking the windscreen, roof of a vehicle, or roof of a recording stage.
Long shotguns may also be used on some interiors, providing that the room or sound
stage is very large and free of echo. They offer the advantage of increased overhead range
and headroom on wide shots. Their disadvantage on interiors is: 1) they are physically
longer and may bump a low ceiling; 2) they must be precisely cued or aimed because of
their narrow pattern (to cover two actors requires a very good boom operator); and 3) long
shotguns will exaggerate room echo.
Prime examples of long shotguns include the Sennheiser MKH816 (condenser, 12 volt T
versions & rarer 48 phantom versions); and the new Audio Technica AT4071 (48 phantom).
Audio Technica also offers the AT815a/XLR, which is an Electret condenser (AA battery) ENG
type of shotgun which is good for smaller budgets.
Interior locations are usually better off being miked with a short shotgun. The short
shotgun features a slightly wider pattern and slightly less range, but does not exaggerate
the room echo as much. The wider pattern and physically shorter length of theses mics
facilitates use with lower ceilings, especially when it comes to covering multiple actors.
Short shotguns come in a variety of "focal lengths", so to speak. The Senn.
416 has a fairly tight pattern, and can double for exterior work. The extinct Senn. 435
offered a wider pattern than the 416, less range but also less echo. The extinct Senn.
406, and the current Schoeps, offer fairly wide patterns, short range (a foot or two), but
excellent defense against room echo. The new Audio Technica AT4073a has greater range than
a 416, but a slightly wider pattern and more even off-axis response that makes it one of
the best sounding (very echo resistant) all-purpose interior condenser mics on the market
In the choices of electret condenser short shotguns, there are the Sennheiser K3U/ME80
and the Audio Technica AT835. Neither mic offers the range (4 to 5 feet) of their big
brother condensers (the 416 and the 4073a), but at shorter distances (up to 2-3 feet) they
sound equally good on the track. The main advantages of these ENG shotguns are price (the
Sennheiser is around $450 and the AT is around $250) and ruggedness. Both mics are the
standards of the news gathering industry.
All short shotgun mics should always be used with a foam windscreen, even indoors. Out
of doors, a blimp windscreen or half-blimp such as the Light Wave Mini Screen or Rycote
Softie should be used.
In a pinch, simply wrap a few layers of cheesecloth over the foam windscreen, and then
cover in a tube-style sweat sock. It works.
Any shotgun mic should always be used in a good shockmount to eliminate handling noise
and vibration. The industry standards for short shotguns is the Audio Technica AT8415
universal shockmount (the tic tac toe rubber band mount).
Blimp windscreens require their own brand of pistol grip shockmounts, which are usually
purchased in conjunction with the windscreen system. These mounts are intended to be used
with or without the windscreen, so there is no need to purchase a separate shockmount if
you have a blimp system.